106 2. Sealants & Waterproofing products WATERPROOF EPOXY PRIMER AQUA Two-component water-based clear epoxy primer Two-component, water-based epoxy primer with strong adhesion to non-absorbent substrates, such as asphaltic membranes, ceramic tiles, existing acrylic or polyurethane coatings, aluminum, etc. It can be applied even on fresh concrete surfaces. It is recommended to use it before the application of water or solvent-based polyurethane, hybrid or acrylic waterproofing products, the polyurea waterproofing system WATERPROOF 500 and the polyurethane waterproofing system WATERPROOF PU 700. Necessary before the application of the two-component polyaspartic paint POLYUREA FLOOR COATING. Necessary for the preparation of surfaces before their lining with the quartz aggregates QUARTZ DECO of DUROSTICK. Suitable for applications subjected to rising damp and/or negative pressure (floors, swimming pools, water storage tanks, building foundations, etc.). It can be used as a very strong substrate stabilizer when diluted with water at a ratio of up to 25% by weight. Color: white (becomes transparent when dry). Classified SR-B2.0 per EN 13813. Consumption: 125gr-150gr/m2 per coat, depending on the absorbency of the surface and the dilution of the product. 4kg (Α+Β) (3kg + 1kg) (768044) 4 2.4 Sealing & waterproofing products for rooftops, walls and clay roofing tiles DISCOUNT CATEGORY: E PRODUCT DESCRIPTION PACKAGING (Code) PCS/ BOX/ E. PAL. €/kg €/ PACK. WATERPROOF 500 Two-component polyurea-based waterproofing coat for roofs Advanced new technology two-component, elastomeric, polyaspartic, aliphatic-based (cold polyurea) brushable waterproofing product. It creates a high-performance seamless membrane with strong adhesion on sound cementitious surfaces. It is highly durable and presents long-term resistance to UV radiation and standing water. Distinguished for its excellent resistance to mechanical and chemical stresses, as well as for its zero water absorption. Suitable for the waterproofing and long-term protection of exposed terraces, roofs, parapets, asphaltic membranes, metal roofs and well-adhered acrylic and/or polyurethane waterproofers. Certified as ‘Cool’ material of high reflectivity and whiteness by the National Technical University of Athens, Department of Mining & Metallurgical Engineering, Laboratory of Metallurgy. Classified as product for surface protection of concrete surfaces per EN 1504-2. Color: white. Consumption: • 1.0kg-1.2kg/m2 for two coats, depending on the substrate. • 1.5kg-1.8kg/m2 for three coats, depending on the substrate (long-term protection). SRI: 114 / SR: 90% / e: 0.88 4kg (Α+Β) (2.86kg + 1.14kg) (667040) - 20kg (Α+Β) (14.3kg + 5.7kg) (667200) - Participates in the system WATERPROOF PU 700 100% Polyurethane roof waterproofer Top quality and high performance, brushable one-component elastomeric polyurethane roof waterproofer with long life. Its use creates a uniform protective membrane, without seams or joints, with exceptional adhesion to the substrate, excellent resistance to UV radiation and standing water. It maintains its properties and flexibility at temperatures from -40oC to +90oC. It has high mechanical and chemical resistances – it is impermeable to water but water vapour permeable. Suitable for long-term waterproofing and protection of roofs, balconies, cement boards and drywall. It is also applied over roof mosaics, concrete slabs, new or weathered liquid membranes, polyurethane foam, existing and well-adhered asphalt membranes, metal surfaces etc. In addition, it is suitable for application before the installation of thermal insulating slabs on roofs, in roof gardens, etc. May also be used as part of a waterproofing system in combination with WATERPROOF PU UV TOP COAT, providing enhanced resistance to solar radiation and long-term preservation of the system’s performance characteristics. Color: white. Classified as product for surface protection of concrete surfaces per EN 1504-2. Consumption: • Minimum consumption of 1.5-1.8kg/m² , depending on the substrate and application method. • Maximum consumption of 750gr/m² per coat, to avoid bubble creation in its mass. WHITE 6 kg (738061) 169 WHITE 25 kg (738252) 36 Participates in the system
RkJQdWJsaXNoZXIy MTk0OTg2