105 SEALANTS & WATERPROOFING PRODUCTS DISCOUNT CATEGORY: E PRODUCT DESCRIPTION PACKAGING (Code) PCS/ BOX PCS/ E. PAL. €/kg,lt €/ PACK. 2.4 Sealing & waterproofing products for rooftops, walls and clay roofing tiles HYDROSTOP-PU Polyurethane waterproofer for flat roofs Brushable elastomeric waterproofer with polyurethane and acrylic water-based resins. Apply it to create a seamless membrane without joints, that is impervious to water and provides excellent, long-term roof protection. Certified by the University of Athens (Department of Applied Physics), as ‘Cool’ material of low thermal conductivity and high reflectivity in the visible spectrum at a rate of 93%. Suitable for waterproofing roofs, terraces, parapet walls, gutters, drywall and cement board, as well as properly installed and well adhered asphaltic roofing roll. The product does not require the addition of reinforcing polyester mesh. Classified as product for surface protection of concrete surfaces per EN 1504-2. Color: white. Consumption: •Minimum consumption: 0.75lt to 1.2lt/m2 for two coats, depending on the substrate. •1.2lt to 1.5lt/m2 for three coats, depending on the substrate (long-term protection). SRI: 109 / SRvis: 93% / e: 0.79 750ml (138755) 12 - 3lt (138045) - 120 10lt (138151) - 48 15lt (138052) - 24 DUROSTICK No39 Elastomeric waterproofer for flat roofs Acrylic, elastomeric waterproofer for roofs. It presents high adhesion strength and flexibility, with extreme durability to temperature variations and rain. Its whiteness significantly reduces heat absorption into the roof slab. For long-term durability, it is recommended that instead of priming with the product itself diluted with water, to prime with SOLVENT BASED PRIMER of DUROSTICK. The primer seals in depth capillary cracks and all porous sections of the roof. Two crosswise coats of No39 are enough for the complete waterproofing of a surface for many years. Classified as product for surface protection of concrete surfaces per EN 1504-2. Consumption: 1.0-1.5kg/m2 for two coats, depending on the substrate. SRI: 102 / SR: 82% / e: 0.83 WHITE 1kg (802014) 12 - WHITE 5kg (802052) - 100 WHITE 15kg (802151) - 48 DUROSTICK No39 (BRICK RED) page 110 DUROSTICK DS-220 Elastomeric waterproofer for flat roofs (liquid rubber) Brushable elastomeric acrylic waterproofer for roofs with long-term durability. Ιt creates a white protective membrane, without seams or joints, with excellent adhesion to the substrate. Due to its high modulus of elasticity, it can absorb intense expansions and contractions, without the necessity for additional reinforcement (mesh). It protects surfaces from moisture that can adversely affect concrete rebars. Distinguished for its excellent resistance to extreme weather conditions, maintaining its properties at temperatures from -30°C up to +90°C. Once dry, the surface is walkable without sticking. Presents excellent covering and bridging of the existing hairline and capillary cracks and prevents their reappearance. Exceptional durability to standing water. Apply it easily on flat and sloped roofs that will be lined with clay roofing tiles. Apply it on corners and edges, lead-lined roof valleys, balconies and built-in planters. Classified as product for surface protection of concrete surfaces per EN 1504-2. Color: white. Consumption: 1.0-1.5kg/m2 for two coats, depending on the substrate. SRI: 112 / SR: 89% / e: 0.83 5kg (428054) - 100 15kg (428153) - 48 25kg (428252) - 24 Participates in the systems Value f or m on ey flexibility, with extreme durability to temperature variations and rain. Its whiteness sig nificantly reduces heat absorption into the roof slab. For long-term durability, it is rec Brushable elastomeric acrylic waterproofer for roofs with long-term durability. Ιt cre and contractions, without the necessity for additional reinforcement (mesh). It pro sticking. Presents excellent covering and bridging of the existing hairline and capil
RkJQdWJsaXNoZXIy MTk0OTg2