PRODUCT PRODUCT DESCRIPTION APPLICATIONS DUROSTICK products A detailed description of the products (Properties, Applications, Use, Technical Specifications, Certifications) can be found in the company’s CONTEMPORARY CONSTRUCTION MANUAL, at www.durostick.com and on the product packaging. 274 Repair & Renovation Guide 100% ACRYLIC PRIMER Coverage: Approximately 10-15m2/lt, depending on the absorbency and the dilution rate, on properly prepared surfaces. Packaging: Containers of 750ml, 3lt, 10lt Recommend to be used prior to painting, on plastered and concrete wall surfaces, as well as surfaces coated with cementitious pastes (leveling fillers). Remove any loose paints from surfaces already coated with emulsion and acrylic paints and prime them with a single coat of 100% ACRYLIC PRIMER, before repainting. Suitable for any interior and exterior application. ACRYLIC EMULSION Improving additive for tile adhesives & grouts Consumption: The dilution ratio of acrylic emulsion with water is from 1:1 up to 1:2, depending on the application. Packaging: Containers of 1lt, 5lt, 20lt Its addition into tile adhesives is strongly recommended for exterior installations in exposed areas that are subjected to expansions and contractions. It is also necessary for installations on surfaces with radiant floor heating systems, and non-absorbent substrates. Ideal for tile installations on spaces and areas that are permanently exposed to moisture, such as swimming and athletic pools, fountains, car washes etc. Its addition to grouts increases their flexibility and adhesion to the sides of the tiles. It also increases their waterproofing abilities, and resistance to acid cleaners, as well as chlorinated and salt (sea) water. It is also recommended as a primer for absorbent substrates and aircrete and for the stabilization of brittle floor cement screeds. Furthermore, it significantly contributes to the preservation of darker color grouts from discoloring. ACRYLIC CAULK Siliconized and paintable Consumption: Indicatively, one 280ml cartridge fills 8 linear meters of a 6x6mm joint. Packaging: Cartridge of 280ml Suitable for flexible sealing at various construction applications, such as cracks or joint filling, with widths ranging from 1-20mm. It adheres to almost every building component, such as concrete, plaster and gypsum, clay bricks, wood, as well as aluminum and painted iron, etc. Necessary for painter for crack filling and the covering of hairline cracks on walls, after priming, and prior to painting with emulsion or acrylic paints. It is highly recommended for aluminum frame installations and various carpentry projects. Suitable for sealing the perimeter joint of window and door casings, on concrete or plastered walls. Once dry, it creates a, ready to be painted, surface. Apply, using a small putty knife, for the covering of surface cracks of 0.5-1mm width, on flat roofs to be waterproofed with elastomeric waterproofers (Νο39, TECHNOPROOF or DS-220).
RkJQdWJsaXNoZXIy MTk0OTg2