PRODUCT PRODUCT DESCRIPTION APPLICATIONS DUROSTICK products A detailed description of the products (Properties, Applications, Use, Technical Specifications, Certifications) can be found in the company’s CONTEMPORARY CONSTRUCTION MANUAL, at www.durostick.com and on the product packaging. 266 Repair & Renovation Guide RENOLIT Stone waterproofing agent Consumption: 150-300ml/m2, depending on the absorbency of the surface. Packaging: Containers of 1lt, 4lt, 15lt Suitable for waterproofing any type of natural or artificial stone lining, on interior and exterior surfaces, walls, and floors. On exterior paved floors with slabs next to gardens, its impregnation (preventively) is recommended to protect the stone and the applied varnish from rising damp. Apply RENOLIT first and then one of the following varnishes DUROSTICK D-12, VISTA, or DECOFIN POLYURETHANE. Mud rain, air pollutants, nicotine, and fireplace soot are easily cleaned from the surfaces two coats of RENOLIT have been applied. RESIN POWDER Improving polymer resin in powder form Consumption: Depending on the application and the desired level of improvement. Packaging: Plastic measuring container with 12 bags of 1kg each one Plastic measuring container with 6 bags of 1kg each one APPLICATIONS AS ADDITIVE: • In concrete in an amount of 500gr to 1000gr per 25kg and in ready-mixed mortars in an amount of 250gr to 1000gr per 25kg, depending on the desired improvement. Also, add it: • In concrete repairs. • In building mortar. • In scratch and base coat plaster • In new plasters or in existing ones to be repaired. • In floor screeds. • In cementitious adhesives. • In grouts & adhesives for tiles, marble. • In brushable cementitious waterproofers. • In the microcement DS-250 for applications of thin coats, up to 4mm, as well as in renovations over existing tiles or mosaics. APPLICATION AS SPRAYABLE OR BRUSHABLE PRIMER: For surface stabilization of floors and of loose surfaces made of plaster, concrete, or lightweight mortars (filling screeds). ROMIX THERMO Fiber-reinforced adhesive for insulation boards on walls and roofs Consumption: As adhesive: 2,5-4kg/m2, depending on the notch size and the substrate. As mesh coating layer: 1,5kg/m2/mm to cover the fiberglass mesh. Packaging: 25kg paper bag Cementitious adhesive, suitable for the installation of expanded or extruded polystyrene insulation boards, on vertical or horizontal surfaces, for interior and exterior use. Suitable for applications of external thermal insulation systems for buildings, as well as for roof thermal waterproofing systems. The adhesive meets the requirements of EAD 040083-00-0404 guidelines for External Thermal Insulation Composite Systems.
RkJQdWJsaXNoZXIy MTk0OTg2