PRODUCT PRODUCT DESCRIPTION APPLICATIONS DUROSTICK products A detailed description of the products (Properties, Applications, Use, Technical Specifications, Certifications) can be found in the company’s CONTEMPORARY CONSTRUCTION MANUAL, at www.durostick.com and on the product packaging. 260 Repair & Renovation Guide HYDROSTOP WATERTANK Flexible and brushable two-component gray waterproofing mortar for special applications. Ideal for demanding waterproofings - including potable water tank applications. Consumption: 1.3kg/m2/mm thick coat. •Moisture: 2.6kg/m2 (2 coats) •Water under pressure: 5.0kg/m2 (4 coats) •Roof garden: 5.0kg/m2 (4 coats). Packaging: Container 14kg (2x5kg mortar + 4lt resin). Set of 35kg (25kg mortar + 10lt resin) Its applications are not limited to drinking (potable) water tanks. It also applies for: • waterproofing surfaces of concrete, brick, plaster, cement screed, stone, etc., • surfaces with high standards of water repellency, such as in underground structures, foundations, tunnels, wet floors, as well as in structures that receive high (positive & negative) hydrostatic pressures, such as basements and foundations (exterior application, before backfilling and ‘therapeutically’ in the interior), • sloped roofs made of concrete, before installing clay roofing tiles, • bridges, swimming and athletic pools, etc., • protecting lightweight screeds, as part of thermal insulation systems and generally for the waterproofing of any mineral surface exposed to temporary or permanent moisture, • effective sealing and waterproofing of areas to be planted, such as planters, rooftop gardens, etc. Exceptional product for inverted roof insulation systems, before the installation of the insulation boards. Necessary component and part of the perimeter insulation, at ground level (sealing zone), when the thermal insulating with the THERMOSEAL system pertains wall surfaces close to or touching the ground. HYDROSTOP WATERTANK (Professional) LUSSO D’ ORO Decorative styling powders Consumption: • For hand broadcasting: Proportional to the aesthetic requirements of the application. • As additive: one bottle per 750ml of DECOLUX varnish coats 5-7m2/coat, on properly prepared surfaces, depending on their absorbency. Packaging: Bottle of 70ml Decorative, ultrafine metallic pigments that can be used as mixing additives with the decorative acrylic clear solvent-based varnish DECOLUX, yielding colors of gold, silver and copper. Use it in combination with LUSSO D’ORO BASE DI COLORI undercoat as a base coat on plaster, cementitious or ceramic surfaces and items (statues, pots, etc.), to create antique looking patinas. The product can also be applied by hand broadcasting over fresh microcement surfaces, to which it yields a unique character of special aesthetics. Suitable for interior application, on walls and floors. LUSSO D’ ORO BASE DI COLORI Water-soluble undercoat for patina styles Consumption: 1kg/6-8m2 per coat, on properly prepared surfaces. Packaging: Container of 1kg Available in black and brown. Apply it as a base for creating patinas with the styling system DECOLUX varnish mixed with LUSSO D’ORO pigments. Use it on painted or unpainted wood or metal furniture, picture frames, drywall or cement board wall surfaces, interior decorative pieces made of plaster, rosettes, and decorative polystyrene mouldings, ceramic or concrete statues, glass bottles, ceramic pots, etc.
RkJQdWJsaXNoZXIy MTk0OTg2