DUROSTICK products PRODUCT PRODUCT DESCRIPTION APPLICATIONS Repair & Renovation Guide 257 GRANULAR ULTRA Resin & fiber-reinforced cementitious paste (for covering surface defects up to 15mm/coat) Consumption: Approximately 1.4kg/m2/mm thick coat. Packaging: 20kg paper bag Suitable for smoothing plastered or not surfaces, such as finished/exposed concrete or aircrete, covering any surface defects on painted or non-painted walls and ceilings. Smooths, where necessary, wall surfaces painted with RELIEF or with textured style plaster. By applying one to two coats of 1-15mm, a smooth surface is created, ready for priming and painting. TWO-COMPONENT HYDROSTOP White cementitious, flexible waterproofer for flat roofs and vertical surfaces Consumption: 1.0-1.3kg/m2/mm thick coat Packaging: 16kg Container (2x5.6kg mortar + 1x4.8kg resin) It is mainly used for waterproofing roofs on properly prepared surfaces. It is also used as a substrate, even on slightly cracked surfaces that have capillary cracks and that are to be lined with tiles. It waterproofs walls made of cement blocks, bricks, aircrete, exterior plastered surfaces, while it is ideal for the protection of north-facing walls. Suitable to waterproof basements before their backfill, but also after the fact, (on the interior), after the plaster has been removed, over the highest point of the moisture damage. HYDROSTOP ACRYLIC PLASTER FINE Acrylic-based waterproof top coat plaster/render in paste form, fine finish Consumption: •Hydrostop Acrylic Plaster Fine 1,0mm: 1.8-2.0kg/m2/mm. •Hydrostop Acrylic Plaster Fine 1,5mm: 2.0-2.3kg/m2/1.5mm. Packaging: Container of 25kg Available in white and 44 selected color chart colors and 261 selected colors from its fan deck Τhermoseal Plaster. Suitable for use as render/top coat instead of marblebased plaster. It can also be applied as a decorative coating on interior surfaces. Apply it by hand or injection machine. It can be applied to all primed building materials such as plaster, concrete, drywall and cement board, aircrete etc., and on all surfaces, such as walls and ceilings. It participates as a top coat render to external thermal insulation systems. HYDROSTOP FLOOR Brushable, fiber-reinforced floor waterproofing mortar Consumption: 1.3kg/m2/mm thick coat. Packaging: 25kg paper bag Necessary for the waterproofing of substrates before their lining with tiles, marble and stones. Applied in swimming pools, baths, showers, balconies, terraces, aircrete etc. Completely waterproofs lightweight filling screeds, after priming them with AQUAFIX or D-20 diluted 1: 1 with water.
RkJQdWJsaXNoZXIy MTk0OTg2