PAINT In conclusion... è We must prepare or have at our disposal the appropriate quantity of paint capable of completing the painting of, at least an entire, single surface, in order to avoid creating two-tone surfaces after the application because a small amount of paint needed to complete a wall was a slightly different color. è The dilution ratio of the paint with water or the appropriate solvent must necessarily follow the instructions on the paint package. Otherwise, the paint properties are negatively affected, such as: opacity (coverage), paint adhesion, and color. Regarding the application of paint on an exterior surface, and in order to increase the resistance of sensitive organic pigments to their exposure to UV radiation, we suggest the final coat of paint to be done without any dilution. To avoid discoloration, and for exterior use, it is ideal to prefer and select to use UV resistant paints. è The painting of a surface necessarily includes the proper preparation that has to be done on its substrate. The good condition of the substrate, (as per its stability, adhesion, cleanliness, flatness, evenness), is a determining factor for the success of the paint application, affects the final aesthetic result and its durability over time, with the least possible problems. è If the substrate is unsound, any additional coat(s) over it (paint in our case) will be unsound on it as well. The application will be in danger of being damaged at any time and will need spot repair or total restoration. è Always make sure to create sound substrates before applying paint to them. è After removing loose spots and dust, existing unstable paints, or other foreign bodies, prime with special primers to create the necessary conditions to safely proceed with the painting of the surface. 104 Repair & Renovation Guide
RkJQdWJsaXNoZXIy MTk0OTg2