It is not affected by UV radiation (chalking). UV Resists the corrosive gases in the atmosphere as well as chlorides, carbon dioxide and sulfur oxides. Excellent resistance to the creation of mold and algae. mold Use 1. Preparation of new surfaces: Using a roofing scraper or a wide chisel, remove all deteriorated sections, if any. Continue by using a hard, street type, broom. If any moss, lichen or grease stains are present, remove them by using D-95 CLEANER of DUROSTICK or a bleach-water solution at a dilution ratio of 1:1. Scrub the surface thoroughly and rinse with plenty of clean water. Surfaces to be waterproofed must be dry and should not get wet for the next 48 hours, in order to avoid surface moisture from being trapped. 2. Preparation of surfaces coated with waterproofing product(s): • Detached torch-down roofing materials: Remove them using a wide roofing scraper or roofing torch. • Well adhered existing torch-down roofing materials, it is required to thoroughly remove all the dust from their surface and to seal any detached sections (if needed). • Detached or deteriorated elastomeric waterproofers, have to be removed using a wide roofing scraper or a razor blade. • Detached elastomeric materials that are not visible, can be found using a garden 3 p t A O p T c D o t It is not affected by UV radiation (chalking). Resists the corrosive gases in the atmosphere as well as chlorides, carbon dioxide and sulfur oxides. Excellent resistance to the creation of mold and algae. 1. Preparation of new surfaces: Using a roofing scraper or a wide chisel, remove all deteriorated sections, if any. Continue by using a hard, street type, broom. If any moss, lichen or grease stains are present, remove them by using D-95 CLEANER of DUROSTICK or a bleach-water solution at a dilution ratio of 1:1. Scrub the surface thoroughly and rinse with plenty of clean water. Surfaces to be waterproofed must be dry and should not get wet for the next 48 hours, in order to avoid surface moisture from being trapped. 2. Preparation of surfaces coated with waterproofing product(s): • Detached torch-down roofing materials: Remove them using a wide roofing scraper or roofing torch. • Well adhered existing torch-down roofing materials, it is required to thoroughly remove all the dust from their surface and to seal any detached sections (if needed). • Detached or deteriorated elastomeric waterproofers, have to be removed using a wide roofing scraper or a razor blade. • Detached elastomeric materials that are not visible, can be found using a garden Does not create any bubbles. Offers walkability in short time without sticking. Its super white color is unaffected by mudrain (does not yellow), thanks to its unique water repellency. USEFUL TIP In addition to the roof/terrace surface, protect also the wall surfaces of your house with the elastomeric and sealing paint D-80 HYDROSTOP ELASTIC. It covers hairline and capillary cracks and is particularly resistant to sudden temperature variations, intense sunshine, constant humidity and frost. Maintains its color stability over time process by coating the entire area with 2-3 crosswise coats, to cover any minor substrate imperfections. Apply each coat 6-18 hours after the previous one was applied (depending on ambient conditions) or once the previous coat has completely cured and it is walkable.
RkJQdWJsaXNoZXIy MTk0OTg2