High reflectivity of solar radiation, due to its exceptional whiteness. Excellent water vapour permeable. Its flexibility remains unaffected, even at -25°C. hose. Pour water on the roof surface from about 1 meter high and listen carefully. Notice the change of the sound the water makes when it hits the detached sections of the waterproofing and mark them. Cut the detached sections using a razor blade, a scraper or other mechanical means. Scrape the defective material off. 3. Application: Before application on cement surfaces, using a roller and a brush, prime the surface using the water soluble, micromolar stabilizer AQUAFIX or the SOLVENT BASED PRIMER diluted 50% with THINNER 101 of DUROSTICK. Alternatively, dilute the product by adding 30% water and prime the entire surface. Once the primer has been absorbed into the surface and is completely dry, it is possible for some hairline cracks to become visible. Treat those cracks by applying several coats of HYDROSTOP-PU, until they are completely sealed. Seal wider cracks (≥ 1mm) using the elastomeric sealant DS POLYMER or by using the polyurethane elastomeric sealant DUROFLEX-PU of DUROSTICK. Once the sealant is dry, apply 2 coats of the polyurethane waterproofer HYDROSTOP-PU over the sealed cracks. Complete the waterproofing High reflectivity of solar radiation, due to its exceptional whiteness. Excellent water vapour permeable. Its flexibility remains unaffected, even at -25°C. hose. Pour water on the roof surface from about 1 meter high and listen carefully. Notice the change of the sound the water makes when it hits the detached sections of the waterproofing and mark them. Cut the detached sections using a razor blade, a scraper or other mechanical means. Scrape the defective material off. 3. Application: Before application on cement surfaces, using a roller and a brush, prime the surface using the water soluble, micromolar stabilizer AQUAFIX or the SOLVENT BASED PRIMER diluted 50% with THINNER 101 of DUROSTICK. Alternatively, dilute the product by adding 30% water and prime the entire surface. Once the primer has been absorbed into the surface and is completely dry, it is possible for some hairline cracks to become visible. Treat those cracks by applying several coats of HYDROSTOP-PU, until they are completely sealed. Seal wider cracks (≥ 1mm) using the elastomeric sealant DS POLYMER or by using the polyurethane elastomeric sealant DUROFLEX-PU of DUROSTICK. Once the sealant is dry, apply 2 coats of the polyurethane waterproofer HYDROSTOP-PU over the sealed cracks. Complete the waterproofing s High reflectivity of solar radiation, due to its exceptional whiteness. Excellent water vapour permeable. Its flexibility remains unaffected, even at -25°C. hose. Pour water on the roof surface from about 1 meter high and listen carefully. Notice the change of the sound the water makes when it hits the detached sections of the waterproofing and mark them. Cut the detached sections using a razor blade, a scraper or other mechanical means. Scrape the defective material off. 3. Application: Before application on cement surfaces, using a roller and a brush, prime the surface using the water soluble, micromolar stabilizer AQUAFIX or the SOLVENT BASED PRIMER diluted 50% with THINNER 101 of DUROSTICK. Alternatively, dilute the product by adding 30% water and prime the entire surface. Once the primer has been absorbed into the surface and is completely dry, it is possible for some hairline cracks to become visible. Treat those cracks by applying several coats of HYDROSTOP-PU, until they are completely sealed. Seal wider cracks (≥ 1mm) using the elastomeric sealant DS POLYMER or by using the polyurethane elastomeric sealant DUROFLEX-PU of DUROSTICK. Once the sealant is dry, apply 2 coats of the polyurethane waterproofer HYDROSTOP-PU over the sealed cracks. Complete the waterproofing
RkJQdWJsaXNoZXIy MTk0OTg2