TICK and seal before any other application. Application: D-1 FLEX of DUROSTICK applies to meticulously soaked surfaces, in 2-3 equal thickness crosswise coats of 1mm thick each one. Use an emulsion or a round chalk brush or a roller for emulsion paints, or even metal trowel. Empty the product in a clean container with cool water, at a mixing ratio of 18kg mortar to 4.5lt water (1.0lt water for 4kg) for trowel application or 5.4lt water (1.2lt water to 4kg) for chalk brush or roller applications. It is recommended to mix using a low-rpm drill equipped with the appropriate attachment, until a lump-free, homogeneous mass is created. The mixture has to be thick enough, to be suitable for each application method. The mixture remains workable for 60 minutes and each additional coat approximately 2 hours after the previous one and while the previous one is still fresh. In case the product remains on the surface longer and dries, re-soak the surface. Protect the product for the next 24-48 hours, after its application completion, from high temperatures, rain and frost. NOTES • D-1 FLEX should not be mixed with more water than specified • It is prohibited to add cement, plaster or lime as well as any type of improving additive • It is highly recommended to install tiles using flexible/deformable adhesives, such as GOLD, EXTRA POWER, ELASTIC or DUROFAST FLEX of DUROSTICK • Waterproof cracked roof coving between horizontal and vertical surfaces by just applying two consecutive coats of D-1 FLEX • Avoid applying the product when the surface is directly exposed to sunlight or strong winds • Do not allow for D-1 FLEX to be directly exposed (without top coating) when applied in swimming pools and fountains. to +90°C • Pot life: 60 minutes • Application thickness: 1mm/coat • Foot traffic: After 3 hours • Backfilling: After 3 days • Tile installation or microcement application: After 2 days • Water tightness per DIN 1048: Under water pressure up to 7 Atm (kg/cm²), 7 days after the application. fiber-reinforced brushable waterproofing mortar
RkJQdWJsaXNoZXIy MTk0OTg2