PROPERTIES Highly penetrating and hydrophobic silicate solution. Protects against rising damp by injecting the product into walls. During the application, the reaction between the silicate solution and calcium hydroxide contained in building elements, results in the formation of insoluble compounds and the formation of hydrophobicity in the treated elements. In this way, the capillary pores of the building elements are sealed, preventing damp from affecting them. ADVANTAGES •Does not corrode concrete rebars. •Yields high hydrophobicity of the building elements. •Does not block breathability (after the application). APPLICATIONS HYDROSTOP WALL creates a hydrophobic horizontal barrier against rising damp in walls or concrete structures, by drilling into the application element. It is also applied in cases of existing wall damp, by impregnating the surface. USE Surface preparation The product is applied by drilling and injecting it, with or without any pressure applied. The drilling points and the distance between them are determined by the composition and absorbency of the wall. 1. Pressure-free application Begin by drilling holes into the wall. The required hole size is 16mm in diameter, 15-20cm apart and at an angle of 30°- 45°. Drill holes at two levels (one set of holes to be drilled up and one down). The depth of the holes is calculated to be less than 5cm from the overall wall thickness. Coat both sides of the wall with the waterproofing mortar D-1 to prevent HYHYDROSTOP wall Hydrophobic silicate solution Proposed solution by DUROSTICK!
RkJQdWJsaXNoZXIy MTk0OTg2