PRODUCTS FOR TILE & MARBLE 1.2 Surface preparation before the application/lining PRODUCT DESCRIPTION PACKAGING (Code) PCS/ Ε. PAL. €/kg €/PACK. DISCOUNT CATEGORY: Β 81 HYDROSTOP FLOOR Brushable, fiber-reinforced floor waterproofing mortar Fiber-reinforced, brushable cementitious mortar that protects from water absorption lightweight insulating material, that will be later covered with cement screeds. That protection is essential especially when the insulating material surfaces have cracks or they are brittle and dusting. Penetration points, like cracked grout joints around tiles and marble, will cause the soaking of lightweight insulations, storing water in their mass. It is absolutely necessary before the installation of tiles and marble, to waterproof substrates in swimming pools, bathrooms and showers, balconies, as well as terraces and aircrete. Apply it easily using an emulsion brush, the STYLING ROLLER 22cm of DUROSTICK or the flat side of a notched trowel, in 2-3 crosswise coats. Classified as product for surface protection of concrete surfaces (c) per EN 1504-2. Color: gray. Consumption: 1.3kg/m²/mm thick coat. For the above application D-1 (p. 107) or D-1 FLEX (p. 107 ) may also be used, instead of HYDROSTOP FLOOR. 25kg (316252) pal. 1500kg 60 DUROSTICK D-64 Self-leveling fast setting cement screed for smoothing floors, for thicknesses of 3-30mm Pourable, self-leveling cement screed, for thicknesses from 3 up to 30mm. It is fast setting and curing, without forming any shrinkage-related cracks. Distinguished for its high mechanical strength against abrasion, compression and impacts. Also distinguished for its strong adhesion to any sound mineral substrate. It presents excellent rheology, workability and has the ability to be pumped. Ideal for rapid leveling with a coating of up to 30mm thick per coat, and for smoothing concrete floors, cement screeds or existing mosaics to be lined with marble, tiles, vinyl flooring, carpet, hardwood flooring, microcement etc. Suitable for interior floor applications. Ideal solution for preparing substrates to accept heavy loads (weights) and heavy traffic as well as floors over radiant floor heating systems, provided that the expansion joints of the substrate/slab are maintained throughout. It yields a smooth, durable finish surface with abrasion resistant properties, naturally making it the ideal choice for constructing new interior floors in shopping malls, supermarkets, stores, exhibition centers, before their lining. Classified CT-C50-F15-AR2 per EN 13813. Color: gray. Consumption: Approximately 1.7kg/m2/mm thick coat. 25kg (515259) pal. 1200kg 48 DUROSTICK D-65 Self-leveling, fast setting cement screed for smoothing floors, for thicknesses of 1-10mm Pourable, self-leveling cement screed for smoothing floors, suitable for thicknesses from 1 up to 10mm. Distinguished for its high resistance to compression and abrasion, impact, and disintegration. Also distinguished for its strong adhesion to any sound mineral substrate as well as its excellent workability and ability to be pumped. Ideal for rapid leveling and for smoothing concrete floors, cement screeds or existing mosaics to be lined with marble, tiles, vinyl flooring, carpet, hardwood flooring, microcement etc. Suitable for interior floor applications. Classified CT-C30-F6-AR2 per EN 13813. Color: gray. Consumption: Approximately 1.5kg/m2/mm thick coat. 25kg (552254) pal. 1200kg 48
RkJQdWJsaXNoZXIy MTk0OTg2