78 1. PRODUCTS FOR TILE & MARBLE RAPID (SPEED SET) Antifrost tile adhesive High quality special purpose cementitious white tile adhesive of early strength, for rapid and powerful installations. Suitable when there is pressure to deliver time-sensitive projects, such as working in commercial spaces, or trying to avoid unfortunate consequences when working outdoors from unexpected rainfall and sharp drops of temperature, (below +4°C), before any regular adhesive would have adequate time to set. Recommended for quick repairs and installations on stairs from the bottom up. Antifrost with zero slip. Necessary for both interior and exterior applications that need to be grouted the day of the installation, 3 hours after the lining's completion. When working with medium and large format tiles, the application of the adhesive is done by the method of double coat application, on the substrate, but also on the tile (tile back buttering). Classified C2FT per EN 12004. Color: white. Consumption: 3-5kg/m2*. 25kg (020258) pal. 1500kg - 60 DISCOUNT CATEGORY: A 1.1 Tile, granite & marble installation *The consumption rate of the adhesives depends on the application method (single or double coating - tile back buttering), the notch of the trowel, the surface smoothness, and the dimensions of the tiles. DISCOUNT CATEGORY: Β PRODUCT DESCRIPTION PACKAGING (Code) PCS/ BOX PCS/ E. PAL. €/kg,lt €/PACK. DUROSTICK D-23 Marble & granite adhesive White, cementitious, polymer-fortified antifrost adhesive. Distinguished for its extremely strong adhesion, initial and final adhesive strength. It does not stain white or light colored marble. Suitable for marble and granite linings on walls, floors, stairs, for both interior and exterior applications. Necessary for installing textured and honed marble as well as stone on building facades. Provides excellent adhesion to regular and irregular shaped floor slabs subject to increased mechanical stresses. When adding ACRYLIC EMULSION or D-20 of DUROSTICK into the mixing water at a ratio of D-20: water = 1: 2 or DUROMAX at a ratio of 1: 5, further enhances its properties. This way, it is suitable for vertical marble cladding up to a height of 3m and a thickness of 1–3 cm, thus eliminating the need for mechanical supports/clips. Also suitable for installing marble and slabs on exterior surfaces subjected to expansions and contractions and over floors with radiant heating systems. Color: white. Classified C2T per EN 12004. Consumption: 4-7kg/m², depending on the size of the notch of the trowel, the smoothness of the substrate and the dimensions of the marble and stone slabs. 25kg (016251) pal. 1500kg 60 DUROSTICK ACRYLIC EMULSION Improving additive for tile adhesives & grouts Special purpose improving additive for tile adhesives and grouts. It increases their bonding power and adhesive strength, flexibility, waterproofing, resistance to abrasion and their service life. A necessary additive when working on substrates with intense expansions and contractions because it imparts flexibility to adhesives and grouts. Also recommended as primer, for absorbent substrates and aircrete, as well as for stabilizing brittle floor cementitious mortars and filling mortars. Consumption: The dilution ratio of acrylic emulsion with water is from 1:1 up to 1:2, depending on the application. 1lt (001011) 15 - 5lt (001059) - - 20lt (001202) - - strong adhesion, initial and final adhesive strength. It does not stain white or light color for vertical marble cladding up to a height of 3m and a thickness of 1–3 cm, thus elim
RkJQdWJsaXNoZXIy MTk0OTg2