279 DISCOUNT CATEGORY: Α 9.5 System supplementary products 9. Thermal waterproofing for roofs Thermal insulation and waterproofing systems for roofs PRODUCT DESCRIPTION - APPLICATION PACKAGING (Code) €/kg €/PACK. DUROFIX Fiber-reinforced, polymer modified repair mortar for thicknesses of up to 6cm/coat Fiber-reinforced repair cement mortar, of high strength. Due to its composition with special polymers, hydraulic binders, selected aggregates and synthetic fibers, it does not shrink, or crack and does not sag on vertical surfaces. Provides excellent workability, adhesion, resistance to frost, impact, abrasion and moisture. Repairs all construction/manufacturing defects for thicknesses of up to 6cm per coat, without the requirement of any formwork. It is also ideal for all concrete repair works, for restoring broken edges in steps and balconies, and columns. Suitable for constructing coving mortars for roofs, where horizontal and vertical surfaces meet. Color: gray. Classified PCC R3 as concrete repair product per EN 1504-3. Consumption: Approximately 18kg/m2/cm thick coat. 25kg (315255) pal. 1500kg 60 9.6 Alternative waterproofing choices for flat roofs DISCOUNT CATEGORY: Ε DISCOUNT CATEGORY: Α TWO-COMPONENT HYDROSTOP White cementitious, flexible waterproofer for roofs and vertical surfaces Flexible and brushable, cementitious waterproofing white mortar for long-lasting waterproofing of roofs, balconies and walls. It adheres strongly to plaster and concrete. It is necessary to soak the surfaces before applying the product. The cured product remains unaffected by solar radiation and rain. It offers long-lasting waterproofing (exceeding 15 years), when applied in 3 crosswise coats of 1mm thick each one. Classified as product for surface protection of concrete surfaces (c) per EN 1504-2. Color: white. Packaging: 16kg (11.2kg A + 4.8kg B), 32kg (22,4kg A + 9,6kg B) Consumption: 1.0-1.3kg/m2/mm thick coat. 16kg (801161) 32 Set 32kg (801970) - Fiber special polymers, hydraulic bind 6cm per coat, without the requirement of any form DUROSTICK DS-490 Reinforcing fiberglass mesh with 4x4mm mesh opening for cementitious brushable waterproofing mortars & spackling pastes Fiberglass mesh with 4x4mm mesh opening and 90gr/m2 weight for integrated reinforcement of cementitious waterproofing coatings and resinous spackling pastes for cement boards. Distinguished for its resistance to alkaline environments. Offers significant reinforcement and protects from capillary cracks resulting from temperature variations. Reinforces and bridges cementitious waterproofing coatings on balconies, roofs, pools, reservoirs and water towers. ROLL 1mx50m (457900) 48
RkJQdWJsaXNoZXIy MTk0OTg2