255 8.7 System supplementary products & accessories External Thermal Insulation Composite System THERMOSEAL 8. External wall thermal insulation PRODUCT DESCRIPTION - APPLICATION PACKAGING (Code) SPOOL €/ LINEAR METER DUROSTICK DS-265 Closed cell backer rod for joint sealant support Round backer rod made of foam that is highly flexible and compressible with non-stick properties. It ensures the mobility of every type of sealant and assists in adjusting the depth of the joint, based on the specs of the project. Ø 10mm (483107) 600m Ø 20mm (483206) 150m PRODUCT DESCRIPTION - APPLICATION PACKAGING (Code) PCS / BOX €/PC €/PACK. PLASTIC HOLESAW Special purpose plastic holesaw for simultaneously forming holes and anchor guides on insulation boards in order to install the appropriate anchors in the correct position and depth. Adapts easily to electric drills and provides extended usage with any kind of expanded or extruded polystyrene boards. Size: Ø 70 BOX (894019) 30 PRODUCT DESCRIPTION - APPLICATION PACKAGING (Code) PC/ PL. BOX €/PACK. METAL HOLESAW Special purpose metal holesaw for simultaneously forming holes and anchor guides on insulation boards in order to install the appropriate anchors in the correct position and depth. Adapts easily to electric drills and provides extended usage with any kind of expanded or extruded polystyrene boards. Size: Ø 70 PLASTIC BOX (895016) THE BOX INCLUDES A REPLACEMENT PART 1 PRODUCT DESCRIPTION - APPLICATION PACKAGING (Code) PCS / E. PAL. €/m2 €/PACK. DUROSTICK DS-4160 Reinforcing fiberglass mesh for thermal insulation systems and microcement, with 4x4mm mesh opening Fiberglass mesh for reinforcing facade coatings on thermal insulation systems. It has 4x4mm mesh opening and weight 160gr/m2. Distinguished for its resistance to alkaline environments. Provides significant reinforcement to mortars and protects them from cracks resulting from expansions and contractions. The use of DUROSTICK DS-4160 with the External Thermal Insulation Composite System for buildings, THERMOSEAL (ETICS) is imperative since surface coatings are affected by particular stresses. Primarily because the solar heat cannot be defused backwards due to the insulating boards and on the other hand due to the existence of many joints between the insulation boards. ROLL 1mx50m (457160) 33 DISCOUNT CATEGORY: Α DISCOUNT CATEGORY: Ε
RkJQdWJsaXNoZXIy MTk0OTg2