246 8.1 Thermal insulation products External Thermal Insulation Composite System THERMOSEAL 8. External wall thermal insulation DISCOUNT CATEGORY: Ε DISCOUNT CATEGORY: B PRODUCT DESCRIPTION - APPLICATION PACKAGING (Code) m2/BUNDLE THICKNESS mm* €/m2 €/BUNDLE XPS ETICS EMB Extruded polystyrene boards used as insulation material for the External Thermal Insulation Composite System (Etics) Thermoseal, as well as for insulation applications over pitched roofs and concrete surfaces. Available without skin, but textured (embossed) in a diamond pattern finish, providing higher adhesion and lower resistance to water vapour diffusion. Square edge board is available, with special order 15 (695098) 20 10.5 (695104) 30 7.5 (695111) 40 6 (695128) 50 5.25 (695135) 60 4.5 (695142) 70 3.75 (695159) 80 BOARD DIMENSIONS (cm): 125 x 60 3 (695166) 100 Declared value of Thermal conductivity λ D=0.033 W/m*K (20-60mm) / λ D=0.034 W/m*K (70-100mm) ROMIX THERMO Fiber-reinforced adhesive for insulation boards on walls and roofs Cementitious adhesive, suitable for the adhesion of expanded (EPS) or extruded (XPS) polystyrene insulation boards, on vertical or horizontal surfaces, for interior and exterior use. Advanced new technology resins are contained within its fiber-reinforced composition, providing it with resistance to moisture and great adhesion to substrates made of concrete, plaster, bricks or cement blocks. They also provide it with the crucial flexibility necessary in thermal insulation system applications. Suitable for adhering thermal insulation boards, EPS and XPS, to building facades but also applied as their base coat, in combination with the reinforced fiberglass mesh, DS-4160 of DUROSTICK. Recommended for thermal waterproofing systems (relevant systems such as COOL ROOF and COOL ROOF LIGHT). The adhesive meets the requirements of EAD 040083-00-0404 guidelines for External Thermal Insulation Composite Systems. Classified GP: CSIV/Wc2 per EN 998-1. Color: white. Consumption: • As adhesive: 2.5-4kg/m², depending on the notch size and the substrate. • As mesh coating layer: 1.5kg/m²/mm to cover the fiberglass mesh. 25kg (137253) pal. 1500kg 60 PRODUCT DESCRIPTION - APPLICATION PACKAGING (Code) PCS/ Ε. PAL. €/kg €/PACK. ULTRACOLL THERMO Fiber-reinforced adhesive for insulation boards on walls and roofs Fiber-reinforced cementitious adhesive, fortified with resins that provide excellent flexibility and resistance to moisture. Presents exceptional bonding power and high adhesion on thermal insulation boards made from expanded (EPS) or extruded polystyrene (XPS), polyurethane, cork, etc., on walls made of concrete, plaster, bricks or cement blocks. Suitable for both bonding insulation boards to the building facades, and as base coat, in combination with the reinforced fiberglass mesh, DS-4160 of DUROSTICK. The adhesive is part of the Certified Exterior Thermal Insulation Composite System for buildings THERMOSEAL of DUROSTICK and is in compliance with the requirements of EAD 040083-00-0404, ETA 13/0006, and ETA 13/0007. ULTRACOLL THERMO is recommended for COOL ROOF and COOL ROOF LIGHT, the Flat Roof Thermal Insulation and Waterproofing Systems of DUROSTICK, thereby creating a tested thermally insulating and waterproofing system with an extended life. Classified GP: CSIV/Wc2 per EN 998-1. Color: white. Consumption: • As adhesive: 2.5-4kg/m², depending on the notch size and the substrate. • As mesh coating layer: 1.5kg/m²/mm to cover the fiberglass mesh. 25kg (320259) pal. 1500kg 60 Fiber ibility and resistance to moisture. Presents exceptional bonding power and high ad hesion on thermal insulation boards made from expanded (EPS) or extruded polysty rene (XPS), polyurethane, cork, etc., on walls made of concrete, plaster, bricks or ce as base coat, in combination with the reinforced fiberglass mesh, DS System for buildings THERMOSEAL of DUROSTICK and is in compliance with the re quirements of EAD 040083 8.2 Adhesives for thermal insulation board installations
RkJQdWJsaXNoZXIy MTk0OTg2