219 COATING PASTES - UNDERCOATS & PAINTS 6.7 Two-component systems (Epoxy - Polyurethane - Polyurea) DISCOUNT CATEGORY: E PRODUCT DESCRIPTION PACKAGING (Code) €/kg €/PACK. NOTE: Please contact us for specific delivery times and schedules on all items marked ‘SPECIAL ORDER’. DUROEPOXY FLOOR PRIMER SF Two-component epoxy primer, without solvents Highly durable and clear primer without solvents and great penetrating ability. Necessary undercoat for the two-component epoxy-based paint DUROEPOXY FLOOR SF. It creates an abrasion-resistant surface that does not dust and is suitable for the surface stabilization and waterproofing of concrete and cementitious floor surfaces that dust. It also functions as a system with the slip-resistant mortar ANTISLIP, combining antislip surfaces with hygiene. Classified SR-B2.0-AR0.5-IR4 per EN 13813. Color: transparent. Consumption: 200-300gr/m² per coat, on properly prepared surfaces, depending on their absorbency. 5kg (A+B) (3.2kg+1.8kg) (328057) DUROEPOXY FLOOR SF Two-component epoxy paint, without solvents Highly durable self-leveling white or colored epoxy paint without solvents. Exceptionally durable and resistant to abrasion, chemicals, corrosives, mineral oils, salt or chlorinated water, as well as extreme weather conditions. Presents powerful adhesion on concrete, plaster, wood, MDF. It creates a surface that is distinguished for its high hardness and its zero absorbance that does not favour bacterial growth and it is suitable for areas subjected to strict hygiene standards. Suitable for hospitals, laboratories, dairy plants, wineries, commercial kitchens and slaughter houses, repair shops and car washes, garages, gas stations, pools, fountains, etc. Create antislip surface by broadcasting QUARTZ SAND of DUROSTICK with grain size from 0.01-0.5mm. Classified SR-B2.0-AR0.5-IR4 per EN 13813. Consumption: •Smooth surface: 250-300gr/m2 per coat. •Anti-skid surface: 400-600gr/m2 per coat. Selected colors: Additional RAL colors are available by special order only. Minimum quantity for any order is 125kg. Notes: •Surfaces coated with DUROEPOXY FLOOR SF may come in direct contact with food. Certified by the State General Laboratory with Protocol Number 04019/015/000. •Chalking (surface deterioration) is a typical problem of all epoxy systems applied on exterior surfaces. Restore surfaces just by recoating them with DUROEPOXY FLOOR PRIMER SF once a year. WHITE 10kg (460108) 10kg (A+B) (8kg+2kg) RAL 7032 (sand gray) 10kg (461105) RAL 7035 (light gray) 10kg (462102) RAL 7040 (gray) 10kg (463109) RAL 3009 (oxide red) 10kg (464106) RAL 1015 (beige) 10kg (465103) RAL 1013 (light beige) 10kg (466100) RAL 6021 (pale green) 10kg (467107) RAL 5024 (pastel blue) 10kg (468104) Highly durable and clear primer without solvents and great penetrating ability. Neces sary under It also functions as a system with the slip-resistant mortar ANTISLIP, combining antis
RkJQdWJsaXNoZXIy MTk0OTg2