190 6. COATING PASTES - UNDERCOATS & PAINTS 6.1 Finishing pastes, repair putties & drywall reinforcement products DISCOUNT CATEGORY: A PRODUCT DESCRIPTION PACKAGING (Code) PCS/ BOX €/kg €/PACK. SUPER FLEX POWDER Flexible, fiber-reinforced cementitious sealant for cracks from 1-15mm Advanced new technology, vinyl-based sealant in powder form, reinforced with glass microspheres. Thixotropic, presenting zero shrinkage and strong adhesion to any porous or non-porous surface. It is water repellent, it remains unaffected by frost or permanent moisture, even standing water. It seals joints or cracks in plaster and concrete without peeling or shrinking. It also seals tile grout, marble and glass block joints, as well as cracks and joints on clay roof tiles, decorative bricks, etc. Apply it using a putty knife or a small taping knife, and if necessary, apply it through the BLANK CARTRIDGE or the professional barrel gun, DUROSEAL 600 of DUROSTICK. It can be colored with the pigments in powder form, DUROCOLOR POWDER-C, when added at a rate of 3% by weight, creating 96 permanent colors or paint over it with emulsion and acrylic paints, 24 hours after its application. Classified PCC R2 as product for non structural repair of concrete per EN 1504-3. Color: off-white. Consumption: Indicatively 250gr fill 6 linear meters of a 5x5mm joint. 250gr (145043) 12 5kg (145050) 4 PRODUCT DESCRIPTION PACKAGING (Code) PCS/ BOX PCS/ E. PAL. €/kg €/PACK. DUROSTICK D-67 Joint compound for drywall Gypsum-based jointing product ideal for drywall. Distinguished for its high strength, and strong adhesion. Doesn’t crack when applied to widths up to 15mm. It has great workability and it does not create any surface defects; it sands easily and gives a smooth finish. It is suitable for taping joints, in combination with the use of the reinforcing adhesive tape, DUROSTICK DS-230 and for spackling the screw holes related to drywall installation. Furthermore, it is ideal for adhering drywall panels on flat surfaces and for patching damaged drywall. Classified 3B as jointing material for drywall per EN 13963. Color: light gray. Consumption: 100-150gr/linear meter, depending on the width and depth of the joint. 20kg (556207) pal. 1200kg - 60 5kg (556054) 4 144 DUROSTICK D-77 Resinous cement paste for smoothing cement boards from 1-10mm/coat Resin, fiber-reinforcedcementitious paste with great coverage. Just add water to create an easy-to-use gray paste with minimal shrinkage and no cracking. It covers surface imperfections even in large thicknesses, resistant to moisture, frost and has high initial and final strength in compression and flexion. Its great coverage per coat, when applied either by hand or by plastering machine, provides a complete solution for coating cement boards after taping and makes D-77 of DUROSTICK, a necessary product, ready to be primed and painted. Suitable for interior but mainly for exterior surfaces. Classified GP: CSIV/Wc1 per EN 998-1. Color: gray. Consumption: Approximately 1.5kg/m²/mm thick coat. 25kg (555255) pal. 1050kg - 42 5kg (555057) 4 192 tape, DUROSTICK DS-230 and for spackling the screw holes related to drywall in
RkJQdWJsaXNoZXIy MTk0OTg2