184 5.3 PLASTERS & REPAIR PRODUCTS 5.3.2 Repair products DUROSTICK EASYFIX Fiber-reinforced, polymer modified repair mortar, for thicknesses of up to 7cm/coat Fiber-reinforced repair cementitious mortar with controlled shrinkage. It presents strong adhesion to the substrate and develops early mechanical strength. Provides excellent workability, high thixotropy and does not sag when applied in thicknesses of up to 7cm per coat. Combines perfectly the repair and finishing of a surface. Ideal for repairing and smoothing concrete elements on both horizontal and vertical surfaces. Suitable for filling concrete defects on floors, walls, and roofs. Also, suitable as coving mortar, etc. Classified PCC R3 as concrete repair product per EN 1504-3. Color: gray. Consumption: Approximately 15kg/m²/cm thick coat. 25kg (107256) pal. 1500kg - 60 DUROFIX Fiber-reinforced, polymer modified repair mortar, for thicknesses of up to 6cm/coat Fiber-reinforced repair cement mortar of high strength. Due to its composition with special polymers, hydraulic binders, selected aggregates and synthetic fibers, it does not shrink, or crack and does not sag on vertical surfaces. Provides excellent workability, adhesion, resistance to frost, impact, abrasion and moisture. Repairs all construction/manufacturing defects for thicknesses of up to 6cm per coat, without the requirement of any formwork. It is also ideal for all concrete repair works, for restoring columns, broken edges in steps, and balconies. Suitable for constructing coving mortars, where horizontal and vertical surfaces meet. Classified PCC R3 as concrete repair product per EN 1504-3. Color: gray. Consumption: Approximately 18kg/m2/cm thick coat. 25kg (315255) pal. 1500kg - 60 MEGAFIX Flexible, multipurpose mortar for repair and waterproofing of wall surfaces Flexible, one-component, fiber-reinforced silicate mortar with polymers. Distinguished for its strong adhesion and excellent workability. It presents excellent surface hardness and zero shrinkage. Suitable for repairs as well as for complete restorations of wall topcoat surfaces. It prevents the damaging effects of moisture penetration by creating a long-term, water repellent coating with thickness of up to 5mm per coat. Moreover, it seals cracks from 0.5mm to 30mm wide and 40mm deep, not allowing them to reoccur. Its strong adhesion strength allows for applications even on painted surfaces made of plaster and concrete, when the paint is well adhered. It reduces the possibility of deterioration of the structural elements due to the effects of CO2 (carbon dioxide), SO2 (sulfur dioxide) or NO2 (nitrogen dioxide). As topcoat plaster, it is classified GP: CSIV/Wc2 per EN 998-1. As repair product, it is classified PCC R1 per EN 1504-3. Color: off-white. Consumption: 1.5kg/m²/mm thick coat. 5kg (105054) 4 192 25kg (105252) pal. 1200kg - 48 PRODUCT DESCRIPTION PACKAGING (Code) PCS/ BOX PCS/ Ε. PAL. €/kg €/PACK. DISCOUNT CATEGORY: Α DURABILITY YEARS special polymers, hydraulic bind 6cm per coat, without the requirement of any form repair works, for restoring columns, broken edg surfaces. Suitable for filling concrete defects on floors, walls, and roofs. Also, suita
RkJQdWJsaXNoZXIy MTk0OTg2